Translation status

464 Strings
4%
Browse Translate
6,337 Words
2%
39,083 Characters
2%

Strings status

Strings Words Characters
464 6,337 39,083
All strings Browse Translate Zen
23 139 818
Translated strings Browse Translate Zen
441 6,198 38,265
Unfinished strings Browse Translate Zen
440 6,096 37,648
Untranslated strings Browse Translate Zen
1 102 617
Strings marked for edit Browse Translate Zen
2 3 18
Strings with any failing checks Browse Translate Zen
2 3 18
Translated strings with any failing checks Browse Translate Zen
2 3 18
Failing check: Unchanged translation Browse Translate Zen

Other components

Component Translated Unfinished Unfinished words Unfinished characters Untranslated Checks Suggestions Comments
Android GPL-3.0-only 43% 257 852 4,528 257 8
App Stores 100% 1
iOS GPL-3.0-only 79% 92 578 3,665 92 33
iOS InfoPlist GPL-3.0-only 87% 1 51 309 1
iOS Settings GPL-3.0-only 0% 20 127 761 20
Browse all components

Summary

Project website phyphox.org
Translation process
  • Translations can be made directly.
  • Translation suggestions can be made.
  • Any authenticated user can contribute.
  • The translation uses monolingual files.
  • The translation base language is editable.

Reviews are disabled for this language. Review setting: Project settings.

All translation states, including those needing editing, are eligible to be written to the translation file.

Learn how to customize the workflow for this language.

Source code repository git@github.com:phyphox/phyphox-translation.git
Repository branch master
Last remote commit Take the reworked Sonar and Doppler descriptions into en.po c34bfee
Staacks authored 10/14/2026
Last commit in Weblate chore(l10n): update Chinese (Traditional Han script) translation fd1cfe9
User avatar staacks authored 10/14/2026
Weblate repository https://translate-new.phyphox.org/git/phyphox/experiments/
File mask experiments/*.po
Monolingual base language file experiments/en.po
Translation file Download experiments/sv.po
Last change Oct. 14, 2026, 12:15 p.m.
Last change made by Sebastian Staacks
Language Swedish
Language code sv
Text direction Left to right
Case sensitivity Case-sensitive
Number of speakers 13,338,376
Number of plurals 2
Plural type One/other
Plurals Singular 1
Plural 0, 2, 3, 4, 5, 6, 7, 8, 9, 10, …
Plural formula n != 1
10/14/2026

String statistics

Strings percent Hosted strings Words percent Hosted words Characters percent Hosted characters
Total 464 6,337 39,083
Translated 4% 23 2% 139 2% 818
Needs editing 1% 1 1% 102 1% 617
Read-only 0% 0 0% 0 0% 0
Failing checks 1% 2 1% 3 1% 18
Strings with suggestions 0% 0 0% 0 0% 0
Untranslated strings 94% 440 96% 6,096 96% 37,648
Last 12 months Previous

Activity in last 12 months

0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes
OctNovDecJanFebMarAprMayJunJulAugSep

Quick numbers

0
Hosted words
0
Hosted strings
0%
Translated
0
Contributors
and previous 30 days

Trends of last 30 days

—
Hosted words
—
—
Hosted strings
—
—
Translated
—
—
Contributors
—
User avatar staacks

Resource updated
The “experiments/en.po” file was changed. 10/14/2026
User avatar staacks

String updated in the repository

Detect small frequency shifts of the Doppler effect.

You need a tone generator that emits a constant frequency (for example 1000Hz from a second phone). Enter this base frequency in the experiment's setup. The experiment will determine the recorded frequency and calculate the relative speed of the sound source.
 
doppler.phyphox_description
10/14/2026
User avatar staacks

String updated in the repository

Measures distances through echoes and the speed of sound.

A sonar sends out sound, which gets reflected by the object you want to measure. As sound travels at a speed of approximately 340 m/s, the time until the reflection reaches the microphone of your phone can be used to calculate the distance of this object.

This experiment continuously plays a short "chirp", a sound sweeping from 2 kHz to 10 kHz, repeated about 23 times per second, and records at the same time. A crosscorrelation of the chirp and the recorded data gives information about the timing at which echoes occur. Several chirps are averaged for each result. The strongest signal is the sound traveling directly from the speaker to the microphone and all echoes are timed relative to it. This timing can then be multiplied with the speed of sound (and divided by 2 as the sound has to travel forth and back) and you get the distance at which the echo originated.

However, sound usually travels in every direction. For a sonar this means, that when targeting a wall, you also get reflections from the floor, the ceiling, another wall nearby, a post and simply from every suitable "hard" surface nearby. Therefore this sonar gives you all the reflections and it is up to you to interpret the result and to figure out, which reflection corresponds to the target you intended to measure. So start with a small hard target and try to screen all other directions with some foam material. Also, this needs a quiet environment.
 
sonar.phyphox_description
10/14/2026
User avatar staacks

Changes committed
Changes committed 10/14/2026
User avatar staacks

Resource updated
The “experiments/sv.po” file was changed. 10/14/2026
User avatar staacks

String added in the repository
Enter the frequency of your tone generator as base frequency. A shorter time step gives more values per second, a longer one gives more precise values. Values are only shown while the tone is clearly recognizable and stays within a few hundred hertz of the base frequency.
 
Enter the frequency of your tone generator as base frequency. A shorter time step gives more values per second, a longer one gives more precise values. Values are only shown while the tone is clearly recognizable and stays within a few hundred hertz of the base frequency.
10/14/2026
User avatar staacks

String added in the repository
Using a known light source, you can tap the graph, select the calibrate mode at the bottom and pick peaks to match them with known wavelengths. You can then see the calibrated spectrum on tab 3.
 
Using a known light source, you can tap the graph, select the calibrate mode at the bottom and pick peaks to match them with known wavelengths. You can then see the calibrated spectrum on tab 3.
10/14/2026
User avatar staacks

String added in the repository
The raw data from the camera is converted to RGB and the individual RGB channels are linearized assuming the gamma curve of sRGB, and then converted to luma. The relative luminance is the luma value normalized to the camera settings such that a pure white image yields a relative luminance of 1 if the camera is set to an exposure time of 1/60s, an ISO of 100 and an aperture of f/1 (Note that this still does not allow for comparison across different models.).
 
The raw data from the camera is converted to RGB and the individual RGB channels are linearized assuming the gamma curve of sRGB, and then converted to luma. The relative luminance is the luma value normalized to the camera settings such that a pure white image yields a relative luminance of 1 if the camera is set to an exposure time of 1/60s, an ISO of 100 and an aperture of f/1 (Note that this still does not allow for comparison across different models.).
10/14/2026
User avatar staacks

String added in the repository
We recommend to keep the exposure such that the measured area is at medium brightness (i.e. gray). The auto exposure from phyphox will adapt the camera settings to achieve this and this brightness level is mostly unaffected by the post-processing of your phone. The relative luminance is then almost entirely based on the camera settings (especially ISO and exposure time) that are required to achieve this brightness. However, the auto exposure takes a moment to settle, so you should wait a moment before taking relative luminance measure and observe if the preview image settles in a medium gray brightness.
 
We recommend to keep the exposure such that the measured area is at medium brightness (i.e. gray). The auto exposure from phyphox will adapt the camera settings to achieve this and this brightness level is mostly unaffected by the post-processing of your phone. The relative luminance is then almost entirely based on the camera settings (especially ISO and exposure time) that are required to achieve this brightness. However, the auto exposure takes a moment to settle, so you should wait a moment before taking relative luminance measure and observe if the preview image settles in a medium gray brightness.
10/14/2026
User avatar staacks

String added in the repository
- Brightness boost: Most phones will increase the brightness of the image if it is much too dark.
 
- Brightness boost: Most phones will increase the brightness of the image if it is much too dark.
10/14/2026
Browse all translation changes